• Nanocomposite Material Synthesized Via Horizontal Vapor Phase Growth Technique: Evaluation and Application Perspective. [2021].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (2) Rahmad Kuncoro Adi (3) Gil Nonato C. Santos

• Teknologi Additive Manufacturing (3d Printing) : Berbasis Stereolithography. [2024].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• MOISTURE (KELEMBAPAN): Konsep, Pengukuran, dan Aplikasi. [2024].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (2) Prof. Ir. Jamasri, Ph.D., IPU., ASEAN Eng.

• Satu Sampai Lima Puluh : Cerita KKN UGM Apa Adanya. [2023].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Pengujian Surface Roughness (Kekasaran Permukaan) pada Material dengan Perlakuan Permukaan yang Berbeda. [2022].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Proses manufaktur dan mekanika komposit. [2022].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (2) Prof. Ir. Jamasri, Ph.D., IPU., ASEAN Eng.

• Metrologi dalam Industri Manufaktur. [2022].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (2) Dr. Ir. Budi Arifvianto, S.T., M.Biotech. (3) Ir. Muslim Mahardika, S.T., M.Eng., Ph.D., IPM., ASEAN Eng. (4) Dr. Ir. Urip Agus Salim, ST., M.Eng.Sc.

• Inovasi Prototipe Jadah Abon Tempe Siap Santap Dalam Kemasan Sachet Vacuum Retort Pouch. [2024].
  (1) Dr. Ir. Endy Triyannanto, S.Pt., M.Eng., IPM., ASEAN Eng. (2) Asep Nurhikmat (3) KHARISTYA ROZANA (4) Pradita Iustitia Sitaresmi (5) Mugianton, S.Si., M.Sc. (7) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (8) Ir. Edi Suryanto, M.Sc., Ph.D., IPU., ASEAN Eng. (9) Ir. Rusman, M.P., Ph.D. (10) Dr. Ir. Rio Olympias Sujarwanta, S.Pt., M.Sc., IPM., ASEAN Eng. (11) Dr. Rio Jati Kusuma, S.Gz., MS. (16) SAFNA FAUZIAH (17) Dr. Mohammad Zainal Abidin, S.Pt., M.Biotech.

• PROSES PEMBUATAN DINDING TIPIS KEDAP SUARA. [2024].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• TEMPORARY IMMERSION SYSTEMS TERINTEGRASI SENSOR PARAMETER LINGKUNGAN DAN KONTROL OTOMATIS UNTUK PERCEPATAN PERTUMBUHAN TANAMAN IN VITRO. [2023].
  (1) Prof. Dr. Endang Semiarti, M.S., M.Sc. (2) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (3) Dr. Ir. I Wayan Mustika, S.T., M.Eng. (4) Prof. Dr. Ir. Aziz Purwantoro, M.Sc. (5) Prof. Dr. Yekti Asih Purwestri, S.Si., M.Si. (6) Wahyu Aristyaning Putri, S.Si., M.Sc., Ph.D. (7) Beni Hendro Prabowo, M.Sc (8) Anisa Dewi Rahayu (9) LATHIEF AL UMAMI (10) Shiddharta Arya Anggoro Cen

• Perangkat Perpipaan Pengaturan Sirkulasi Udara Mesin Burner Wood Pellet Tipe Vertical. [2023].
  (1) Makbul Hajad, S.T.P., M.Eng., Ph.D. (2) Dr. Joko Nugroho Wahyu Karyadi, S.T.P., M.Eng. (3) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (4) MUHAMMAD HAFIDZ S (5) FAHMI ARYO MAJID

• Proses Treatment Bahan Baku Wood Pellet Dari Biomassa Perkebunan Teh Menggunakan Cetakan Tipe Flat Die Tanpa Campuran Perekat. [2023].
  (1) Makbul Hajad, S.T.P., M.Eng., Ph.D. (2) Dr. Joko Nugroho Wahyu Karyadi, S.T.P., M.Eng. (3) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (4) MUHAMMAD HAFIDZ S (5) FAHMI ARYO MAJID

• Meja Gerinda Pemotong Geser. [2023].
  (1) Dr. Ir. Jayan Sentanuhady, S.T., M.Eng., IPU., ASEAN Eng. (2) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Pengujian Surface Roughness (Kekasaran Permukaan) pada Material dengan Perlakuan Permukaan yang Berbeda. [2022].
  (2) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Metrologi dalam Industri Manufaktur. [2022].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (2) Dr. Ir. Budi Arifvianto, S.T., M.Biotech. (3) Ir. Muslim Mahardika, S.T., M.Eng., Ph.D., IPM., ASEAN Eng. (4) Dr. Ir. Urip Agus Salim, ST., M.Eng.Sc.

• MESIN PEMBONGKAR OTOMATIS BATERAI ION LITIUM. [2022].
  (1) Ir. Muslim Mahardika, S.T., M.Eng., Ph.D., IPM., ASEAN Eng. (5) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (6) Ir. Indra Perdana, S.T., MT., Ph.D. (7) Ir. Eka Firmansyah, S.T., M.Eng., Ph.D., IPM. (8) Dr. Ir. Budi Arifvianto, S.T., M.Biotech.

• PEMBERSIH UDARA RUANGAN. [2021].
  (1) Dr. Ir. Jayan Sentanuhady, S.T., M.Eng., IPU., ASEAN Eng. (2) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (3) Ir. Eka Firmansyah, S.T., M.Eng., Ph.D., IPM. (4) Prof. Ir. Nizam, DIC., M.Sc., Ph.D., IPU., ASEAN Eng.

• METODE DEPOSISI VERTIKAL FASE UAP UNTUK SINTESIS SILVER (Ag) MICRO-NANO DOT PADA SUBSTRAT TABUNG KUARSA. [].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (2) RELA ADI HIMAROSA (3) Prof. Gesang Nugroho, ST., MT., Ph.D.

• Moisture (Kelembapan): Konsep, Pengukuran, dan Aplikasi. [].
  (1) Jazarotun Nisak, S.Si. (2) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (3) Prof. Ir. Jamasri, Ph.D., IPU., ASEAN Eng.

• Teknologi Additive Manufacturing (3D Printing) Berbasis Stereolithography. [].
  (1) Jazarotun Nisak, S.Si. (2) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Metode Pengujian Korosi Boiler Tube Dengan Sistem Furnace Ringkas. [].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (2) Ariyana Dwiputra Nugraha (3) Rakha Naufal Flazui Handoko

• MODIFIKASI 3D PRINTER DENGAN SISTEM ADITIF DAN SUBTRAKTIF. [].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• METODE PEMBUATAN SANDWICH COMPOSITE LATTICE STRUCTURE. [].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• PERANGKAT PEMANTAUAN ENERGI PORTABEL PADA PROSES PENGERINGAN MENGGUNAKAN TUNGKU . [].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (2) Dr. Ir. Jayan Sentanuhady, S.T., M.Eng., IPU., ASEAN Eng.

• METODE SOL-GEL UNTUK SINTESIS NANOMATERIAL DENGAN PERANGKAT KONTROL DAN MONITORING ENERGI. [].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (2) Dr. Ir. Jayan Sentanuhady, S.T., M.Eng., IPU., ASEAN Eng.

• SWAB NASOFARING DENGAN KOMPONEN TERPISAH YANG DILENGKAPI BAGIAN TITIK PATAH. [].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• ALAT PENGUJIAN KOMPOSIT DENGAN MODIFIKASI SUDUT PENARIKAN (ARCAN FIXTURE). [].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (2) Daffa Alandro (3) Ariyana Dwiputra Nugraha

• SISTEM VACUUM SEAL TUBE. [].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (2) RELA ADI HIMAROSA (3) Rahmad Kuncoro Adi (4) Dr. Ir. Jayan Sentanuhady, S.T., M.Eng., IPU., ASEAN Eng.

• UMKM Sleman Kolaborasi dengan Fapet UGM Terapkan Pengemasan Retort, Buat Jadah Abon Tempe Tahan Lama. [2024].
  (1) Dr. Ir. Endy Triyannanto, S.Pt., M.Eng., IPM., ASEAN Eng. (2) Dr. Rio Jati Kusuma, S.Gz., MS. (3) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (4) Ir. Edi Suryanto, M.Sc., Ph.D., IPU., ASEAN Eng. (5) Ir. Rusman, M.P., Ph.D.

• Fapet UGM Gandeng UMKM Sleman Kembangkan Inovasi Pengemasan Jadah Abon Tempe Tahan Lama. [2024].
  (1) Dr. Ir. Endy Triyannanto, S.Pt., M.Eng., IPM., ASEAN Eng. (2) Dr. Rio Jati Kusuma, S.Gz., MS. (3) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (4) Ir. Edi Suryanto, M.Sc., Ph.D., IPU., ASEAN Eng. (5) Ir. Rusman, M.P., Ph.D. (6) Dr. Ir. Rio Olympias Sujarwanta, S.Pt., M.Sc., IPM., ASEAN Eng.

• Data Analysis and Future Trend Related Organic Rankine Cycle (ORC) Applied in Geothermal Power Plant. [2025].
  (1) Fefria Tanbar (2) Rakha Naufal Flazui Handoko (3) Dr. Ir. Hifni Mukhtar Ariyadi, S.T., M.Sc., IPM (4) Lugas Gada Aryaswara (5) Ariyana Dwiputra Nugraha (6) Arionmaro Asi Simaremare (7) Eko Supriyanto (8) Meiri Triani (9) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Defectiveness of Stereolithography (SLA) 3D Printing Manufacturing Process Using Bio-Based Resin PLA of Nasopharyngeal Swabs. [2025].
  (1) Ahmad Mamba'udin (2) MUHAMMAD RAFI R (3) Dr. Ir. Hifni Mukhtar Ariyadi, S.T., M.Sc., IPM (4) Prof. Gesang Nugroho, ST., MT., Ph.D. (5) Ir. Muslim Mahardika, S.T., M.Eng., Ph.D., IPM., ASEAN Eng. (6) Ir. Rachmadi Norcahyo, S.T., M.T (7) Farid Triawan (8) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Thermodynamic Performance Characterization of a Small Scale Organic Rankine Cycle with 5 kW Net Power Output. [2024].
  (1) Fefria Tanbar (2) RAFAEL PUNGKAS P (3) Ariyana Dwiputra Nugraha (4) Handrea Bernando Tambunan (5) Achmad Nurfanani (6) Wigas Digwijaya (7) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (8) Dr. Ir. Khasani, S.T., M.Eng, IPM., ASEAN Eng. (9) Dr. Ir. Hifni Mukhtar Ariyadi, S.T., M.Sc., IPM

• Corrosion Exhibition of Different Boiler Tube Applied in Cofiring System: A Perspective Between Steel and Stainless Steel. [2024].
  (1) Ariyana Dwiputra Nugraha (2) Ir. Mudjijana, M.Eng. (3) KRESNA BUDIMAN (4) Rakha Naufal Flazui Handoko (6) MAHESAFIN ALNA RAMADHAN (7) Muhammad Ibnu Rashyid (8) Alvin Dio Nugroho (9) Daffa Alandro (11) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• An Analysis of the Mechanical Response of Syringe Barrel during the Air and Water Leakage Testing. [2024].
  (1) Krisdiyanto (2) Raja Ariffin Raja G (3) Azuddin M (4) Muhammad Khairi Faiz Bin Ahmad Hairuddin (5) Rahmad Kuncoro Adi (6) Nurvita Risdiana (7) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (8) Rela Adi Himarosa

• Shear Stress Behaviour and Evaluation on Hybrid Material Adhesive Bonding of Aluminium and GFRP. [2024].
  (1) Daffa Alandro (3) Prof. Ir. Heru Santoso Budi Rochardjo, M.Eng., Ph.D., IPM., ASEAN Eng. (4) MUHAMMAD BRYAND (5) IOSIF AZURRA MAULANA (6) Muhammad Ibnu Rashyid (8) Alvin Dio Nugroho (9) MAHESAFIN ALNA RAMADHAN (10) Muhammad Baihaqi (11) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Fire Resistant Composite Laminates from GFRP Reinforced Natural Fibers. [2024].
  (1) Dr. Ir. Arif Kusumawanto, M.T., IPU. (2) STEVEN SUSILO (3) Budi Prawara (4) Endro Junianto (5) Rela Adi Himarosa (6) Ariyana Dwiputra Nugraha (8) Ardi Wiranata, S.T., M. Eng., Ph.D (9) RENDIANTO AGINTA (10) Muhammad Budi Nur Rahman (11) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• The effect of stacking sequence on the properties of hybrid agel/glass fiber reinforced polymer composite laminates. [2024].
  (1) M. IRFAN NURYANTA (10) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Development of Automatic Dual Sequence Control Temporary Immersion Bioreactor Systems for Micropropagation Coelogyne pandurata Lindl. [2023].
  (1) Anisa Dewi Rahayu (2) LATHIEF AL UMAMI (3) Shiddharta Arya Anggoro Cen (4) BIMO RIZKI A (5) LEONARD SEAN (6) KRESNA BUDIMAN (7) LABRIYANTOKO K (8) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (9) Dr. Ir. I Wayan Mustika, S.T., M.Eng. (10) Prof. Dr. Endang Semiarti, M.S., M.Sc.

• The effect of stacking sequence on the tensile properties of hybrid GFRP/bamboo filled with 5wt% of activated carbon derived from coconut shell. [2023].
  (1) Rela Adi Himarosa (2) Rahmad Kuncoro Adi (3) M. IRFAN NURYANTA (4) MOHAMMAD SYAHRIL (5) Lugas Gada Aryaswara (6) TIMOTHY OWEN CHANDRA (7) MAHESAFIN ALNA RAMADHAN (8) Ahmad Mamba'udin (9) MUHAMMAD RAFI R (10) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Hashin failure criterion of CFRP-SPCC hybrid laminates subjected to tensile loading. [2023].
  (1) Muhammad Budi Nur Rahman (2) Rahmad Kuncoro Adi (3) WINCENT GORNES (4) ZAKY FADLURRAHMAN (5) Lugas Gada Aryaswara (6) MOHAMMAD SYAHRIL (7) DIVLAN AUDIE SENTANU (8) Ahmad Mamba'udin (9) MUHAMMAD RAFI R (10) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Experimental Study of Flow and Spray Pattern Characteristics of Biodiesel in a Swirler Burner. [2023].
  (1) Eko Supriyanto (2) Nur Cahyo (3) Ariyana Dwiputra Nugraha (4) Dr. Ir. Jayan Sentanuhady, S.T., M.Eng., IPU., ASEAN Eng. (5) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Design and Structural Analysis of the Battery Crusher Frame. [2023].
  (1) ERWIN FIRMANSYAH (2) Dr. Ir. Budi Arifvianto, S.T., M.Biotech. (3) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (4) Ir. Muslim Mahardika, S.T., M.Eng., Ph.D., IPM., ASEAN Eng.

• The Selection of Coal for Boilers in Textile Industry based on Proximate Test and Cost Analysis. [2023].
  (1) Shaleh Ahmad (2) LEONARD SEAN (3) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Angle and direction effect on the performance of manual music box with PLA-base manufacturing using 3D printing. [2023].
  (1) NAUFAL ACHMAD SALMAN ALFARISI (2) Basuki Rachmat, S.T. (3) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Load variation analysis of heat rate in electricity generation and costs efficiency analysis of 3x330 MW coal-fired power plant: Case study from Indramayu coal-fired power plant, Indonesia. [2023].
  (1) ACHMAD FAISAL (2) FERDINAND MAYCELLO (3) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Imperfection on the manufacturing process of GFRP filled with 5% activated carbon using wet layups technique. [2023].
  (1) TIMOTHY OWEN CHANDRA (2) DANI SETYAWAN (3) GUSTI PUTU SURYA G A (4) Ir. Rachmadi Norcahyo, S.T., M.T (5) Dr. Ir. Jayan Sentanuhady, S.T., M.Eng., IPU., ASEAN Eng. (6) Ir. Muslim Mahardika, S.T., M.Eng., Ph.D., IPM., ASEAN Eng. (7) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Flaw Analysis on the Manufacturing Process of GFRP Laminates using Wet Lay-up Method. [2022].
  (1) JORDAN (2) Rela Adi Himarosa (3) DICK TEGAR FISABILILLAH (4) WISNU HOZAIFA HASAN (5) Dr. Ir. Urip Agus Salim, ST., M.Eng.Sc. (6) Ir. Muslim Mahardika, S.T., M.Eng., Ph.D., IPM., ASEAN Eng. (7) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Influence of Adding Activated Carbon Filler on SandpaperTreated Epoxy Resin Surface. [2022].
  (1) Rela Adi Himarosa (2) MAHESAFIN ALNA RAMADHAN (3) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Tensile properties of epoxy resin filled with activated carbon derived from coconut shell. [2022].
  (1) TIMOTHY OWEN CHANDRA (2) DIVLAN AUDIE SENTANU (3) WINCENT GORNES (4) Dr. Ir. Jayan Sentanuhady, S.T., M.Eng., IPU., ASEAN Eng. (5) Angga Setiawan (6) Gil Nonato C. Santos (7) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Design and analysis of filament winding machine for cylinder manufacturing process using glass fiber composite. [2022].
  (1) Rahmad Kuncoro Adi (2) Sukanta Das (3) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Defect characteristics of unidirectional glass fiber reinforced epoxy manufactured via vacuum assisted resin infusion. [2022].
  (1) Lugas Gada Aryaswara (2) Gil Nonato C. Santos (3) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Moisture absorption behavior of hybrid composite laminates consist of natural and glass fiber. [2022].
  (1) M. IRFAN NURYANTA (2) Dr. Ir. Jayan Sentanuhady, S.T., M.Eng., IPU., ASEAN Eng. (3) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Effects of notch geometry on stress, strain, and safety factor of bimetal and fiber-metal laminates under charpy impact test using explicit dynamic model. [2021].
  (1) WISNU HOZAIFA HASAN (2) DICK TEGAR FISABILILLAH (3) Dr. Ir. Jayan Sentanuhady, S.T., M.Eng., IPU., ASEAN Eng. (4) Ir. Muslim Mahardika, S.T., M.Eng., Ph.D., IPM., ASEAN Eng. (5) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Modeling of the bridge support based on carpenter tape geometry. [2021].
  (1) RAIHAN QOLBY SANTOSO (2) G.N.C Santos (3) Alvin Y Chua (4) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Geometrical effect of SPCC bar by twisting test using graded load. [2021].
  (1) GUSTI PUTU SURYA G A (2) KRESNA BUDIMAN (3) Ir. Rachmadi Norcahyo, S.T., M.T (4) Prof. Ir. Heru Santoso Budi Rochardjo, M.Eng., Ph.D., IPM., ASEAN Eng. (5) Puja I.G.K (6) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Effects of Angle in Notch Geometry on Stress, Safety Factor, and Displacement of SPCC Plate under Tension Loading. [2021].
  (1) JUSTIN EDWARDO (2) ARI PERMANA (3) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Failure Analysis of Water Wall Tube in Circulating Fluidized Bed Boiler. [2021].
  (1) YAYAK TRIASDIAN (2) Nur Busairi (3) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (4) Halomoan Parningotan

• A Study Analysis of Micro-Hydro Powerplant (MHPP) Potential from Cooling of Steam Turbine. [2020].
  (1) YAYAK TRIASDIAN (2) HALOMOAN P T S (3) Prof. Dr. Ir. Bambang Triatmodjo, CES., DEA. (4) Dr.Eng. Ir. R. Rachmat A. Sriwijaya, S.T., M.T., D.Eng., IPM., ASEAN Eng. (5) Ir. Muslim Mahardika, S.T., M.Eng., Ph.D., IPM., ASEAN Eng. (6) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Optimizing Performance of Hybrid CFRP-SPCC Thin layers for Automotive Applications. [2018].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (2) Tomohiro Yokozeki (3) Takahira Aoki

• Simulation and experiment based optimization of calligraphy manufacturing using a 5-axis CNC Milling Machine. [2016].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (2) Ir. Muslim Mahardika, S.T., M.Eng., Ph.D., IPM., ASEAN Eng. (3) Dr. Ir. Subarmono, MT. (4) Prof. Ir. Heru Santoso Budi Rochardjo, M.Eng., Ph.D., IPM., ASEAN Eng.

• Optimization of Calligraphy Manufacturing Using 5 Axis Milling CNC Machine Based on Simulation and Experiment. [2016].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (2) Dr. Ir. Subarmono, MT. (3) Ir. Muslim Mahardika, S.T., M.Eng., Ph.D., IPM., ASEAN Eng. (4) Prof. Ir. Heru Santoso Budi Rochardjo, M.Eng., Ph.D., IPM., ASEAN Eng.

• Optimized control of direct current mini ultra-high voltage amplifier. [2025].
  (1) Ardi Wiranata, S.T., M. Eng., Ph.D (2) AZZAM HASYIM (3) Zebing Mao (4) Witchuda Thongking (5) Dini Nur Afifah (6) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Comparison of "Rose, Aeroleaf, and Tulip” vertical axis wind turbines (VAWTs) and their characteristics for alternative electricity generation in urban and rural areas. [2025].
  (1) Ariyana Dwiputra Nugraha (2) RENDIANTO AGINTA (3) Ardi Wiranata, S.T., M. Eng., Ph.D (4) ADRIYAN C SITANGGANG (5) Eko Supriyanto (6) Fefria Tanbar (7) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Techno-economic studies of low GWP-organic Rankine cycle for low-level geothermal waste heat utilization in Remote Island of Indonesia. [2025].
  (1) Fefria Tanbar (2) Rusdi Febriyanto (3) Dr. Ir. Hifni Mukhtar Ariyadi, S.T., M.Sc., IPM (4) Ariyana Dwiputra Nugraha (5) Arionmaro Asi Simaremare (6) Eko Supriyanto (7) Meiri Triani (8) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Tool wear and surface characteristics of TiAlN/AlCrN insert in high-speed turning of bimetal aluminium alloy-grey cast iron engine block. [2025].
  (1) Rahmat Agung Budi Santoso (2) Prof. Dr. Eng. Ir. Deendarlianto, S.T., M.Eng. (3) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Advanced properties and failure characteristics of hybrid GFRP-matrix thin laminates modified by micro glass powder filler for hard structure applications. [2025].
  (1) Lugas Gada Aryaswara (2) Muhammad Kusni (3) Dafa Wijanarko (4) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Synergizing strength and flexibility: investigating mechanical properties of photopolymer resin blends in DLP 3D printing. [2024].
  (1) Dinny Harnany, S.T., M. Sc. (2) MAHESAFIN ALNA RAMADHAN (3) Haris Ardianto (4) Prof. Ir. Jamasri, Ph.D., IPU., ASEAN Eng. (5) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Advanced FEA simulation of GFRP and CFRP responses to low velocity impact: Exploring impactor diameter variations and damage mechanisms. [2024].
  (1) Muhammad Luthfi Hakim (2) RAIHAN NAFIANTO (3) Ariyana Dwiputra Nugraha (4) Ardi Wiranata, S.T., M. Eng., Ph.D (5) Eko Supriyanto (6) Prof. Gesang Nugroho, ST., MT., Ph.D. (7) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Characteristics and evaluation of recycled waste PVCs as a filler in composite structures: Validation through simulation and experimental methods. [2024].
  (1) Eko Supriyanto (2) Nugroho Karya Yudha (3) Alvin Dio Nugroho (4) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Investigating the mechanical properties and crashworthiness of hybrid PLA/GFRP composites fabricated using FDM-filament winding. [2024].
  (1) Ariyana Dwiputra Nugraha (2) Rahmad Kuncoro Adi (3) Vishnu Vijay Kumar (4) Dr. Ir. Arif Kusumawanto, M.T., IPU. (5) Budi Prawara (6) Endro Junianto (8) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Fracture toughness in SPCC/CFRP hybrid laminates: Mode I and mode II perspectives. [2024].
  (1) Ariyana Dwiputra Nugraha (2) M LUTHFI HAKIM (4) Farid Triawan (5) Murni Handayani (6) Yosephin Dewiani Rahmayanti (7) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Hybrid lattice structure with micro graphite filler manufactured via additive manufacturing and growth foam polyurethane. [2024].
  (1) Fefria Tanbar (2) Alvin Dio Nugroho (3) Ariyana Dwiputra Nugraha (4) Seno Darmanto (5) Djarot Widagdo (6) Prof. Gil Nonato C. Santos (7) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Extreme roughness reduction and ultrafine quality of innovative dual function material extrusion 3D printer. [2024].
  (1) Muhammad Ibnu Rashyid (2) Mahendra Jaya (3) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Comprehensive evaluation of CFRP laminates using NDT methods for aircraft applications. [2024].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (2) Bodo Fiedler

• EXPERIMENTAL AND NUMERICAL SIMULATION OF GFRP CONFINED CYLINDRICAL CONCRETE UNDER COMPRESSION. [2024].
  (1) Ir. Suprapto, Ph.D., IPM. (2) Angga Fajar Setiawan, S.T., M.Eng., Ph.D. (3) Muhammad Fauzi Darmawan, S.T., M.Eng. (4) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (5) Irkhas Bayu Faveryan, S.T., M.Eng.

• Degradation of the protective layer on stainless steel by chlorine variation under high - temperature conditions. [2024].
  (1) Feri Karuana (2) Adi Prismantoko (3) Gaguk Jatisukamto (4) Barman Tambunan (5) Nandang Suhendra (6) Muhammad Syahril (7) Sri Rahayu (8) Arif Darmawan (9) DJAROT B. DARMADI (10) Muhammad Aziz (11) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (12) Hariana

• Extremeroughness reduction andultrafine quality of innovative dual function material extrusion 3D printer. [2024].
  (1) Muhammad Ibnu Rashyid (2) Mahendra Jaya (3) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Economically viable electromechanical tensile testing equipment for stretchable sensor assessment. [2024].
  (1) Ardi Wiranata, S.T., M. Eng., Ph.D (2) Witnadi Dardjat Premiaji, S.Si. (3) Burhan Febrinawarta, S.T., M.T. (4) Zebing Mao (5) Dr. Ir. Hifni Mukhtar Ariyadi, S.T., M.Sc., IPM (6) Dr. Nyayu Aisyah, SST, M.T. (7) Ir. Ryan Anugrah Putra, S.T., M.Sc., M.Eng. (8) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Instability of Detonation Wave at Downstream of Aluminum Crimped Ribbon. [2024].
  (1) Dr. Ir. Jayan Sentanuhady, S.T., M.Eng., IPU., ASEAN Eng. (2) Ir. Willie Prasidha, S.T., M.Eng (3) Akmal Irfan Majid, S.T., M.Eng. (4) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Surface roughness and dimension accuracy data from hybrid manufacturing process using PLA material. [2024].
  (1) Benny Susanto (2) Muhammad Ibnu Rashyid (3) Fefria Tanbar (4) Dr. Ir. Hifni Mukhtar Ariyadi, S.T., M.Sc., IPM (5) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Enhanced mechanical properties of the hybrid CFRP-SLA laminates through laminate modifications. [2024].
  (1) Wahyu Erlangga (2) Daffa Alandro (3) Nugroho Karya Yudha (4) Rohadi Satrio Budi Utomo (5) Ardi Jati Nugroho Putro (6) Prof. Ir. Heru Santoso Budi Rochardjo, M.Eng., Ph.D., IPM., ASEAN Eng. (7) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• The Effect of TiO2-SiO2 Nanocomposite as a Filler on the Self-Cleaning Properties of Material. [2024].
  (1) Rohadi Satrio Budi Utomo (2) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (3) Dr. Ir. Hifni Mukhtar Ariyadi, S.T., M.Sc., IPM

• TiO2–SiO2 nanocomposite via a novel sol-gel method with the addition of an energy monitoring device: Synthesized, characterization and anti-bacterial applications. [2024].
  (1) Rohadi Satrio Budi Utomo (2) Dr. Ir. Jayan Sentanuhady, S.T., M.Eng., IPU., ASEAN Eng. (3) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Comparative study of process parameters’ influence on geometric accuracy and relative errors oflightweight compound gear printed by vat. photopolymerization and material extrusion (7) (PDF) Comparative study of process parameters' influence on geometric accuracy and relative errors of lightweight compound gear printed by vat. photopolymerization and material extrusion. [2024].
  (1) Zeeshan Hamid Malik (2) Ir. Achmad Pratama Rifai, S.T, M.Eng, Ph.D (3) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Investigating the Characteristics of Nano-Graphite Composites Additively Manufactured Using Stereolithography. [2024].
  (1) Ariyana Dwiputra Nugraha (2) Vishnu Vijay Kumar (3) Jessie Puteri Gautama (4) Ardi Wiranata, S.T., M. Eng., Ph.D (5) Kevin Gausultan, S.T.,M.Eng.,M.Sc (6) Muhammad Ibnu Rashyid (7) Rachmat Dzanzani (8) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Failure configuration and evaluation of hybrid CFRP-GFRP laminates using innovative Arcan fixture: Experimental and simulation approach. [2024].
  (1) Ariyana Dwiputra Nugraha (2) Daffa Alandro (3) Kevin Gausultan, S.T.,M.Eng.,M.Sc (4) Muhammad Kusni (5) Yi Chieh Wu (6) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Comprehensive assessment of hybrid GFRP-Graphite filler using modified complex Arcan fixture: Experimental and simulation approach. [2024].
  (1) Daffa Alandro (2) Ariyana Dwiputra Nugraha (3) IOSIF AZURRA MAULANA (4) Alvin Dio Nugroho (5) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Novel lead–tin telluride (PbSnTe) thermoelectric material manufactured via horizontal vapour phase growth technique (HVPG). [2024].
  (1) Sopheap Sam (2) Laurence A. Gan Lim (3) Sundararajan Thirumalai (4) Ardi Wiranata, S.T., M. Eng., Ph.D (5) Prof. Ir. Jamasri, Ph.D., IPU., ASEAN Eng. (6) Dr. Ir. Jayan Sentanuhady, S.T., M.Eng., IPU., ASEAN Eng. (7) Prof. Gil Nonato C. Santos (8) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Load-displacement experimental data from shear loading of hybrid GFRP-graphite filler using a complex Arcan fixture. [2024].
  (1) Ariyana Dwiputra Nugraha (2) Daffa Alandro (3) Alvin Dio Nugroho (4) Eko Supriyanto (5) Fefria Tanbar (6) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Effects of biodegradable- and non-biodegradable-rich waste separation on ash deposition behaviour during coal and refuse-derived fuel co-combustion. [2024].
  (1) Adi Prismantoko (2) Feri Karuana (3) Ardi Nugroho (4) Puji Agus Santoso (5) Hanafi Prida Putra (6) Arif Darmawan (7) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (8) Indro Pranoto, Ph.D. (9) Muhammad Aziz (10) Hariana

• Ash deposition behavior during co-combustion of solid recovered fuel with different coals. [2024].
  (1) Adi Prismantoko (2) Feri Karuana (3) Hafizh Ghazidin (4) Ade Sana Ruhiyat (5) Nesha Adelia (6) Moch. Zulfikar Eka P (7) Romelan (8) Setyo Margo Utomo (9) Nur Cahyo (10) Juli Hartono (11) Arif Darmawan (12) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (13) Muhammad Aziz (14) Hariana

• Characterization of sago tree parts from Sentani, Papua, Indonesia for biomass energy utilization. [2024].
  (1) Benny Sutanto (2) Yohanis Tangke Tosuli (3) Adnan (4) Cahyadi (5) Hossein Nami (6) Prof. Adi Surjosatyo (7) Daffa Alandro (8) Alvin Dio Nugroho (9) Muhammad Ibnu Rashyid (10) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Novel hybrid tube consists of GFRP-PU-graphite powder for lightweight structure applications. [2024].
  (1) Alvin Dio Nugroho (3) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Characteristics of Hybrid Pla and Carbon-Pla in Different Laminates Formations. [2023].
  (1) Muhammad Ibnu Rashyid (2) Ardi Wiranata, S.T., M. Eng., Ph.D (3) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Computer-controlled ultra high voltage amplifier for dielectric elastomer actuators. [2023].
  (1) Ardi Wiranata, S.T., M. Eng., Ph.D (2) Zebing Mao (3) Yu Kuwajima (4) Yuya Yamaguchi (5) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (6) Hiroki Shigemune (7) Naoki Hosoya (8) Shingo Maeda

• The Interconnection of Carbon Active Addition on Mechanical Properties of Hybrid Agel/Glass Fiber-Reinforced Green Composite. [2023].
  (1) M. IRFAN NURYANTA (2) Lugas Gada Aryaswara (3) Rudolf Korsmik (4) Olga Klimova-Korsmik (5) Ariyana Dwiputra Nugraha (6) Seno Darmanto (7) Muhammad Kusni (8) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• A novel of hybrid laminates additively manufactured via material extrusion – vat photopolymerization. [2023].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (2) MOHAMMAD SYAHRIL (3) Ahmad Mamba'udin (4) Prof. Gil Nonato C. Santos

• Excellent Characteristics of Environmentally Friendly 3D-Printed Nasopharyngeal Swabs for Medical Sample Collection. [2023].
  (1) Ahmad Mamba'udin (2) Murni Handayani (3) Farid Triawan (4) Yosephin Dewiani Rahmayanti (5) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Characteristics of triangle in triangulated cylindrical origami with axial load test for space deployable structures. [2023].
  (1) DIVLAN AUDIE SENTANU (2) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• The feed-in tariff (FIT) policy to improve renewable energy utilization: An analysis of FIT implementation in ASEAN countries from renewable energy growth, decarbonization, and investment perspective. [2023].
  (1) Mujammil Asdhiyoga Rahmanta (2) ARI PERMANA (3) WILSON SUSANTO (4) ENDIARJATI D S (5) Dr. Irine Handika Ikasari, S.H., LL.M. (6) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Excellent Hybrid Polyurethane-Graphite Filler Micro Powder As a Lightweight Structure. [2023].
  (1) Alvin Dio Nugroho (2) Daffa Alandro (3) Prof. Dr.Eng. Ir. Herianto, S.T., M.Eng., IPU., ASEAN Eng. (4) Prof. Ir. Jamasri, Ph.D., IPU., ASEAN Eng. (5) Sundararajan Thirumalai (6) Ariyana Dwiputra Nugraha (7) Dr. Ir. Arif Kusumawanto, M.T., IPU. (8) Budi Prawara (9) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Tilt Angle Optimization of Steam Turbine Blade Model Based on Aluminium : The Multi-Simulation Perspective. [2023].
  (1) Ariyana Dwiputra Nugraha (2) MUHAMAD KEVIN FAJRIN (3) Zeeshan Hamid Malik (4) Dr. Ir. Jayan Sentanuhady, S.T., M.Eng., IPU., ASEAN Eng. (5) Muhammad Kusni (6) Seno Darmanto (7) Benny Sutanto (8) Prof. Gesang Nugroho, ST., MT., Ph.D. (9) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Mechanical and chemical properties of matrix composite: Curing agent ratio,degassing process, and filler effect perspectives. [2023].
  (1) ZAKY FADLURRAHMAN (2) Daffa Alandro (3) Prof. Gil Nonato C. Santos (4) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Comprehensive analysis and economic study of railway brake failure from metal-based and composites-based materials. [2023].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (2) MAYRADAFFA ADYUDYA (3) Nur Fatah Rahman (4) Dr. Ir. Jayan Sentanuhady, S.T., M.Eng., IPU., ASEAN Eng. (5) Swathi N. V. Raghu

• Tensile, Compressive, and Flexural Characterization of CFRP Laminates Related to Water Absorption. [2023].
  (1) Sudarisman (2) Haniel (3) Angger Kaloka Taufik (4) Muhammad Tiopan (5) Rela Adi Himarosa (6) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Experimental Investigation of Effect of L-Profile Hybrid Aluminium/GFRP to the Axial and Lateral Characteristic. [2023].
  (1) Ariyana Dwiputra Nugraha (2) Daffa Alandro (3) Dr. Ir. Arif Kusumawanto, M.T., IPU. (4) Endro Junianto (5) Budi Perwara (6) Vishnu Vijay Kumar (7) Gil Nonato C. Santos (8) Dr. Ir. Jayan Sentanuhady, S.T., M.Eng., IPU., ASEAN Eng. (9) Ir. Rachmadi Norcahyo, S.T., M.T (10) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Systematic analysis of fractured specimens of composite laminates: different perspectives between tensile, flexural, Mode I, and Mode II test. [2023].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (2) Tomohiro Yokozeki

• Excellent performance of hybrid model manufactured via additive manufacturing process reinforced with GFRP for sport climbing equipment. [2023].
  (1) Ariyana Dwiputra Nugraha (2) MOHAMMAD SYAHRIL (3) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Broad-class volatile organic compounds (VOCs) detection via polyaniline/zinc oxide (PANI/ZnO) composite materials as gas sensor application. [2023].
  (1) Juanito Raphael F. Foronda (2) Lugas Gada Aryaswara (3) Gil Nonato C. Santos (4) Swathi N. V. Raghu (5) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Failure in power plant system related to mitigations and economic analysis; A study case from steam power plant in Suralaya, Indonesia. [2023].
  (1) Ariyana Dwiputra Nugraha (2) Harianto (3) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Scientometric Analysis and Systematic Study of Nanomaterial Synthesized via CVD, Sol-Gel, and VPG Methods: A Big Data Clustering Perspective. [2023].
  (1) Lugas Gada Aryaswara (2) Dr. Ir. Jayan Sentanuhady, S.T., M.Eng., IPU., ASEAN Eng. (3) Makbul Hajad, S.T.P., M.Eng., Ph.D. (4) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Mechanical evaluation and characterization of hybrid sugarcane bagasse microfibrillated cellulose with added filler materials for use as disposable utensils. [2023].
  (1) ARI WIBOWO (2) Daffa Alandro (3) Manuela S. Killian (4) Prof. Gesang Nugroho, ST., MT., Ph.D. (5) Swathi N. V. Raghu (6) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Degradation of Quality and Contaminants in Lubricants of Diesel Engine Fueled by B100 of Train Power Generator in Long Term Operation. [2023].
  (1) Dr. Ir. Jayan Sentanuhady, S.T., M.Eng., IPU., ASEAN Eng. (2) MUHAMAD INDA ROBBY MARDIYA (3) SANTOSO (4) Nur Fatah Rahman (5) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Design And Evaluation Of Carabiner Using Finite Element Analysis. [2022].
  (1) DIVLAN AUDIE SENTANU (2) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Recent Progress on Natural Fibers Mixed with CFRP and GFRP: Properties, Characteristics, and Failure Behaviour. [2022].
  (1) Ariyana Dwiputra Nugraha (2) M. IRFAN NURYANTA (3) LEONARD SEAN (4) KRESNA BUDIMAN (5) Muhammad Kusni (6) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Rancang bangun mesin separator magnetik untuk proses daur ulang baterai litium 18650. [2022].
  (1) AKHMAD TITO F (2) Ir. Muslim Mahardika, S.T., M.Eng., Ph.D., IPM., ASEAN Eng. (3) Dr. Ir. Budi Arifvianto, S.T., M.Biotech. (4) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Earthing Method Reducing the Length of Acute Respiratory Infection Among Preterm Infants. [2022].
  (1) Estiningtyas (2) Anindhita Yudha Cahyaningtyas (3) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• A Simulation of The Comminution Process of Homogenized Lithium-Ion Battery Models. [2022].
  (1) FAIRUZ ALFALAH WIBISONO (2) Ir. Muslim Mahardika, S.T., M.Eng., Ph.D., IPM., ASEAN Eng. (3) Dr. Ir. Budi Arifvianto, S.T., M.Biotech. (4) AKHMAD TITO F (5) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Policy and Strategies of Tariff Incentives Related to Renewable Energy: Comparison between Indonesia and Other Developing and Developed Countries. [2022].
  (1) Eko Supriyanto (2) Dr. Ir. Jayan Sentanuhady, S.T., M.Eng., IPU., ASEAN Eng. (3) WISNU HOZAIFA HASAN (4) Ariyana Dwiputra Nugraha (5) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• The Characteristic of CFRP Laminates Related to Water Absorption Subjected to Tensile, Bending, and Compression. [2022].
  (1) Sudarisman (2) Alfian Hidayat (3) Haniel (4) Muhammad Tiopan (5) Rela Adi Himarosa (6) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Failure Prediction and Surface Characterization of GFRP Laminates: A Study of Stepwise Loading. [2022].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (2) Bodo Fiedler

• Evaluasi Kekuatan Mesin Bubut Akibat Gaya Pemakanan Pada Ujung Alat Potong. [2022].
  (1) ADHI TRI SETIONO (2) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (3) Dr. Suyitno, S.T., M.Sc

• THE EVALUATION OF MESH CHARACTERISTICS OF THE CAR MODELING AND SIMULATION USING CFD ANALYSIS. [2022].
  (1) ALFIAN MUHAMMAD F H (2) Dr. Ir. Hifni Mukhtar Ariyadi, S.T., M.Sc., IPM (3) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Stereolithography 3D Printer for Micromodel Fabrications with Comprehensive Accuracy Evaluation by Using Microtomography. [2022].
  (1) Anindityo Patmonoaji (2) Mohammad Azis Mahardika (3) Muhammad Nasir (4) Yun She (5) Weicen Wang (6) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (7) Tetsuya Suekane

• A Mini Review on The Recent Progress on The Method of Recycling Lithium-Ion Battery: Pros And Cons In Environmental and Economical Aspect. [2022].
  (1) GUSTI PUTU SURYA G A (2) Novat Pugo Sambodo, S.E., MIDEC. (3) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• First-rate manufacturing process of primary air fan (PAF) coal power plant in Indonesia using laser powder bed fusion (LPBF) technology. [2022].
  (1) Ariyana Dwiputra Nugraha (2) Ruli (3) Eko Supriyanto (4) Rasgianti (5) Budi Prawara (6) Erie Martides (7) Endro Junianto (8) ARI WIBOWO (9) Dr. Ir. Jayan Sentanuhady, S.T., M.Eng., IPU., ASEAN Eng. (10) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Failure analysis of platen superheater tube, water wall tube, and sealpot plate: A case study from electricity power plant in indonesia. [2022].
  (1) RELA ADI HIMAROSA (2) SATRIAWAN DINI H (3) WISNU HOZAIFA HASAN (4) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Recent Progress on the Implementation of Renewable Biodiesel Fuel for Automotive and Power Plants Raw Materials Perspective. [2022].
  (1) Dr. Ir. Jayan Sentanuhady, S.T., M.Eng., IPU., ASEAN Eng. (2) WISNU HOZAIFA HASAN (3) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Challenges of Biofuel Applications in Industrial and Automotive: A Review. [2021].
  (1) Dr. Ir. Jayan Sentanuhady, S.T., M.Eng., IPU., ASEAN Eng. (2) GUSTI PUTU SURYA G A (3) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Model optimization and performance evaluation of hand cranked music box base structure manufactured via 3D printing. [2021].
  (1) NAUFAL ACHMAD SALMAN ALFARISI (2) G.N.C Santos (3) Ir. Rachmadi Norcahyo, S.T., M.T (4) Dr. Ir. Jayan Sentanuhady, S.T., M.Eng., IPU., ASEAN Eng. (5) Nikmatul Azizah (6) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• A Review on Reinforcement Methods for Polymeric Materials Processed Using Fused Filament Fabrication (FFF). [2021].
  (1) JUAN PRATAMA (4) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (5) Dr. Ir. Urip Agus Salim, ST., M.Eng.Sc. (6) Ir. Muslim Mahardika, S.T., M.Eng., Ph.D., IPM., ASEAN Eng. (7) Dr. Ir. Budi Arifvianto, S.T., M.Biotech.

• Characteristics and performance of carabiner remodeling using 3D printing with graded filler and different orientation methods. [2021].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (2) DIVLAN AUDIE SENTANU

• Steel plate cold commercial - carbon fiber reinforced plastics hybrid laminates for automotive applications: curing perspective with thermal residual effect. [2021].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (2) Tomohiro Yokozeki

• The Recent Progress of Natural Source and Manufacturing Process of Biodiesel: A Review. [2021].
  (1) Eko Supriyanto (2) Dr. Ir. Jayan Sentanuhady, S.T., M.Eng., IPU., ASEAN Eng. (3) Ariyana Dwiputra (4) ARI PERMANA (5) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Experimental and numerical analysis of CFRP-SPCC hybrid laminates for automotive and structural applications with cost analysis assessment. [2021].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (2) Tomohiro Yokozeki

• Metals and chemical compounds contaminants in diesel engine lubricant with B20 and B100 biofuels for long term operation. [2021].
  (1) Dr. Ir. Jayan Sentanuhady, S.T., M.Eng., IPU., ASEAN Eng. (2) WILIANDI SAPUTRO (3) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Analisis Pengaruh Biodiesel B20 Dan B100 Terhadap Degradasi Viskositas Dan Total Base Number Minyak Pelumas Pada Mesin Diesel Yang Beroperasi Dalam Jangka Panjang Dengan Metode ASTM D2896 Dan ASTM D445-06. [2020].
  (1) Dr. Ir. Jayan Sentanuhady, S.T., M.Eng., IPU., ASEAN Eng. (2) Akmal Irfan Majid, S.T., M.Eng. (3) WILLIE PRASIDHA (4) WILIANDI SAPUTRO (5) NICO PRADIPTA GUNAWAN (6) THEVIN YOGA RADITYA (7) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• The Progressive Development of Multifunctional Composite Materials in Different Applications. [2020].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Structures and UV resistance of Ag/SnO2 nanocomposite materials synthesized by horizontal vapor phase growth for coating applications. [2020].
  (1) E.B Tibayan Jr. (2) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (3) A.R.C Villagracia (4) Vipin Kumar (5) Gil Nonato C. Santos

• Load-displacement experimental data from axial tensile loading of CFRP-SPCC hybrid laminates. [2020].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (2) Alvin Y Chua

• Dataset of material measurement based on SEM images of Ag/TiO2 nanocomposite material synthesized via Horizontal Vapor Phase Growth (HVPG) technique. [2020].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (2) Alvin Y Chua (3) G.N.C Santos

• Delamination behavior and energy release rate evaluation of CFRP/SPCC hybrid laminates under ENF test: Corrected with residual thermal stresses. [2020].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (3) Tomohiro Yokozeki (4) Takahira Aoki

• The evaluation of failure mode behavior of CFRP/Adhesive/SPCC hybrid thin laminates under axial and flexural loading for structural applications. [2020].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (3) Tomohiro Yokozeki (4) Takahira Aoki

• Performance evaluation of Ag/SnO2 nanocomposite materials as coating material with high capability on antibacterial activity. [2020].
  (1) E.B Tibayan Jr. (2) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (3) Vipin Kumar (4) Christine Fisher (5) A.R.C Villagracia (6) Gil Nonato C. Santos

• A standard method to synthesize Ag, Ag/Ge, Ag/TiO2, SnO2, and Ag/SnO2 nanomaterials using the HVPG technique. [2019].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (2) G.N.C Santos

• Failure mode analysis of CFRP-SPCC hybrid thin laminates under axial loading for structural applications: Experimental research on strain performance. [2019].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Structures, Morphological Control, and Antibacterial Performance of Ag/TiO 2 Micro-Nanocomposite Materials. [2019].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Structures, mechanical properties and antibacterial activity of Ag/TiO2 nanocomposite materials synthesized via HVPG technique for coating application. [2019].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• The strain performance of thin CFRP-SPCC hybrid laminates for automobile structures. [2019].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (2) Tomohiro Yokozeki (3) Takahira Aoki

• Improved Environmental Stability, Electrical and EMI Shielding Properties of Vapor-Grown Carbon Fiber-Filled Polyaniline-Based Nanocomposite. [2018].
  (2) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D

• Micro and nano silver-graphene composite manufacturing via horizontal vapor phase growth (HVPG) technique. [2017].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (2) Castillon, G.B (3) G.N.C Santos (4) Alvin Y Chua

• Statistical design analysis of Silver-Titanium dioxide nanocomposite materials synthesized via Horizontal Vapor Phase Growth (HVPG). [2017].
  (1) Ir. Muhammad Akhsin Muflikhun, S.T., MSME., Ph.D (2) Alvin Y Chua (3) G.N.C Santos