BUKU

Konstruksi Kayu (Timber constructions). [2005].
(1) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE.

Dasar-Dasar Sambungan Kayu (Introduction to Timber Connections). [2005].
(1) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE.

KEKAYAAN INTELEKTUAL

ALAT PEREDAM GAYA GEMPA STRUKTUR JEMBATAN STOPER PANEL GESER MULTI ARAH VARIAN BADAN BERSILANG (SPGMA-BB). [2023].
(1) Angga Fajar Setiawan, S.T., M.Eng., Ph.D. (2) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (3) Prof. Ir. Iman Satyarno, M.E., Ph.D. (4) Mukhlis Sunarso (5) Guntara Muria Adityawarman

ALAT PEREDAM GAYA GEMPA PEGAS BAJA SPIRAL DENGAN SUMBU PENGARAH. [2023].
(1) Prof. Ir. Henricus Priyosulistyo, M.Sc., Ph.D. (2) Angga Fajar Setiawan, S.T., M.Eng., Ph.D. (3) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (4) Tantri Nastiti Handayani, S.T., M.Eng., Ph.D.

Alat peredam gaya gempa struktur jembatan stoper panel geser multi arah varian penampang box dengan gap (SPGMA-PBG). [2021].
(1) Angga Fajar Setiawan, S.T., M.Eng., Ph.D. (2) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (3) Prof. Ir. Iman Satyarno, M.E., Ph.D. (4) Sidiq Purnomo (5) Ignatius Harry

PROSIDING

Pushover analysis in slab-on-piles bridge using reinforced concrete-filled spun piles. [2023].
(1) CHRISTOPHORUS A S R (2) Prof. Ir. Iman Satyarno, M.E., Ph.D. (3) Angga Fajar Setiawan, S.T., M.Eng., Ph.D. (4) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE.

Numerical Model of Finned Tubular Shear Panel Damper for Multi-direction Seismic Excitation. [2022].
(1) ANDIKA M. EMILIDARDI (2) Angga Fajar Setiawan, S.T., M.Eng., Ph.D. (3) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (4) Prof. Ir. Iman Satyarno, M.E., Ph.D. (5) Mukhlis Sunarso

Seismic Performance of Instant Steel Frame House for Post Earthquake Reconstruction. [2022].
(1) WIDARTO SUTRISNO (2) Prof. Ir. Iman Satyarno, M.E., Ph.D. (3) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (4) Ir. Ashar Saputra, S.T., M.T., Ph.D.,IPM.,ASEAN.Eng. (5) Angga Fajar Setiawan, S.T., M.Eng., Ph.D.

Seismic Performance Comparison of Pile Supported Slab Viaduct with PHC Pile and RC Bored Pile in South Part of Java Island. [2022].
(1) MUHAMAD FAUZI DARMAWAN (2) Angga Fajar Setiawan, S.T., M.Eng., Ph.D. (3) Prof. Ir. Iman Satyarno, M.E., Ph.D. (4) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE.

Finite Element Analysis for Developing Multi-direction Crossing Web Type Shear Panel Damper. [2022].
(1) BAGAS NURALIM UTAMA (2) Prof. Ir. Iman Satyarno, M.E., Ph.D. (3) Angga Fajar Setiawan, S.T., M.Eng., Ph.D. (4) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (5) Guntara Muria Adityawarman

Structural Condition Assessment of a Log Bridge Under Heavy Trafﬁc Load (Case Study: 105 Tons Gas Engine Delivery in Central Borneo Project). [2022].
(1) Angga Trisna Yudhistira (2) Angga Fajar Setiawan, S.T., M.Eng., Ph.D. (3) IRFANI NURUL HUDA (4) Budi Suanda (5) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE.

Finite Element Analysis of CRTS III Slab Track Model. [2022].
(1) Muchtar Sufaat (2) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (3) Prof. Ir. Iman Satyarno, M.E., Ph.D. (4) Dr.Ing. Ir. Andreas Triwiyono, IPU. (5) Akhmad Aminullah, S.T., M.T., Ph.D. (6) Mukhlis Sunarso (7) Guntara Muria Adityawarman

Analisis Perkuatan Struktur Truss Baja Penopang Suatu Ballroom Bentang Panjang dengan Metode External-Post Tensioning. [2019].
(1) MUHAMAD FAUZI DARMAWAN (2) Angga Fajar Setiawan, S.T., M.Eng., Ph.D. (3) Ir. Ashar Saputra, S.T., M.T., Ph.D.,IPM.,ASEAN.Eng. (4) Dr.Ing. Ir. Andreas Triwiyono, IPU. (5) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE.

Civil Engineering and Environmental Symposium 2019. [2019].
(1) M FAUZI DARMAWAN (2) Angga Fajar Setiawan, S.T., M.Eng., Ph.D. (3) Ir. Ashar Saputra, S.T., M.T., Ph.D.,IPM.,ASEAN.Eng. (4) Dr.Ing. Ir. Andreas Triwiyono, IPU. (5) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE.

RISBARI: an alternative house model for the 2018 Lombok earthquake affected people. [2019].
(1) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (2) FAHMI ARASYI MURSYID

Pengaruh Prestress terhadap Mekanika Struktur Slab Track Crts III pada pembebanan statik. [2018].
(1) Muchtar Sufaat (2) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (3) Dr.Ing. Ir. Andreas Triwiyono, IPU. (4) Prof. Ir. Iman Satyarno, M.E., Ph.D. (5) Akhmad Aminullah, S.T., M.T., Ph.D. (6) Mukhlis Sunarso (7) Guntara Muria Adityawarman

The First Engineered Pedestrian Bridge using Small Diameter Indonesian Teak Woods: From Design to Project. [2018].
(1) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (2) Prof. Dr. Ir. Bambang Supriyadi, CES., DEA., IPU.,ASEAN.Eng. (3) MARIS SETYO NUGROHO (4) Buan Anshari (5) Zakiah Ahmad

Analisis Perilaku Lentur Balok Laminasi Komposit Kayu Sengon dengan Lamina dan Plate Terhadap Beban Berulang (Loading - Unloading). [2018].
(1) Teguh Wicaksono (2) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (3) Ir. Suprapto, Ph.D., IPM.

The Effect of Diameter and Anchorage Length of Keruing Wooden Dowels, Deformed Steel Dowels and GFRP Dowels on Pull-out Strength of Keruing Timber Block with Epoxy Resin Adhesive. [2018].
(1) PRICILLIA MINDRASARI (2) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (3) Dr. Ir. H. Muslikh, M.Sc., M.Phil.

Structural Test of Traditional Arfak House in Papua (Ratna Juwita, Sitti Asiah, Ummu Kalsum, Fachry Ali Samad). [2017].
(1) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE.

Physical and Mechanical Properties of WPC Board from Sengon Sawdust and Recycled HDPE Plastic (1_Arnandha, Y,5_Prasetya, Y., 6_Prayitno, D.A., 7_Winata, D.C., 8_Satrio, M.H., 9_Amalia, A.). [2017].
(1) Prof. Ir. Iman Satyarno, M.E., Ph.D. (2) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (3) Dr. Ir. Inggar Septhia Irawati, S.T., M.T., IPM.

Wood Frame Floor Model of LVL Paraserianthes Falcataria. [2017].
(1) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (2) Anita Firmanti (3) Dr. Ir. H. Muslikh, M.Sc., M.Phil. (4) Hendra Theodarmo (5) Dani Astuti

Evaluation of bolted connections in wood-plastic composites. [2017].
(1) YUDHI ARNANDHA (2) Prof. Ir. Iman Satyarno, M.E., Ph.D. (3) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (4) Dr. Ir. Inggar Septhia Irawati, S.T., M.T., IPM. (5) MUHAMMAD IHSAN (6) FELYX BIONDY W (7) WILLIAM (8) MAHDINUR (9) ARFIATI FARDHANI

Aplikasi EYM model pada analisis tahanan lateral sambungan sistem Morisco-Mardjono: Sambungan tiga komponen bambu dengan material pengisi rongga. [2012].
(1) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE.

Kuat Tumpu Bambu Sejajar Serat. [2012].
(1) Prof. Ir. Iman Satyarno, M.E., Ph.D. (2) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE.

PUBLIKASI JURNAL

Cyclic Behavior of Multidirectional Box-Shaped Shearing Damper: Experimental Study. [2025].
(1) Angga Fajar Setiawan, S.T., M.Eng., Ph.D. (2) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (3) Prof. Ir. Iman Satyarno, M.E., Ph.D. (4) Noorsuhada Md Nor (5) YUSUF HAROKI (6) Muhammad Fauzi Darmawan, S.T., M.Eng. (7) Sidiq Purnomo (8) Ignatius Harry

The mechanical behavior of multidirectional finned circular hollow steel damper: Analytical and numerical approach. [2025].
(1) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (2) Andika Monanta Emilidardi, S.T., M.Eng. (3) Angga Fajar Setiawan, S.T., M.Eng., Ph.D. (4) Prof. Ir. Iman Satyarno, M.E., Ph.D.

Influence of additional thermal and shrinkage reinforcement to reduce self-induced strain on early-age concrete. [2024].
(1) FAIZAL HANIF (2) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (3) Angga Fajar Setiawan, S.T., M.Eng., Ph.D.

Flexural Properties of Structural Size Glulam Beams Made from Indonesian Wood Species: Experimental Programs. [2024].
(1) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (2) Muhammad Afif Sulhan (3) Mahmud Kori Effendi (4) Dr. Ir. Inggar Septhia Irawati, S.T., M.T., IPM. (5) Rohana Hassan

Thermomechanical Analysis of Cement Hydration Effects in Multi-layered Pier Head Concrete: Finite Element Approach. [2024].
(1) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (2) Ir. Suprapto, Ph.D., IPM. (3) Dr. Ir. Inggar Septhia Irawati, S.T., M.T., IPM. (4) MOHAMMAD AHMAD

Comparative Study of The Seismic Performance Between Simply Supported PSC Box Girder Bridge Equipped with Shear Panel Damper and Lead Rubber Bearing. [2024].
(1) ALVIN KURNIAWAN S (2) Dr.-Ing. Ir. Djoko Sulistyo (3) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (4) Angga Fajar Setiawan, S.T., M.Eng., Ph.D. (5) Prof. Ir. Iman Satyarno, M.E., Ph.D. (6) Sidiq Purnomo (7) Ignatius Harry

Seismic performance enhancement of a PCI-girder bridge pier with shear panel damper plus gap: Numerical simulation. [2024].
(1) Andika Monanta Emilidardi, S.T., M.Eng. (2) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (3) Dr.Ing. Ir. Andreas Triwiyono, IPU. (4) Angga Fajar Setiawan, S.T., M.Eng., Ph.D. (5) Prof. Ir. Iman Satyarno, M.E., Ph.D. (6) ALVIN KURNIAWAN S

NONLINEAR SIMULATIONS TO EVALUATE THE CODE-BASED RESPONSE MODIFICATION FACTOR FOR SEISMIC DESIGN OF SLAB-ON-PILE STRUCTURE. [2024].
(1) Muhammad Fauzi Darmawan, S.T., M.Eng. (2) Angga Fajar Setiawan, S.T., M.Eng., Ph.D. (3) Prof. Ir. Iman Satyarno, M.E., Ph.D. (4) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE.

Seismic Performance Comparison of Simply Supported Hollow Slab on Pile Group Structure with Different Operational Category and Shear Panel Damper Application. [2023].
(1) YUSUF HAROKI (2) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (3) Prof. Ir. Henricus Priyosulistyo, M.Sc., Ph.D. (4) Angga Fajar Setiawan, S.T., M.Eng., Ph.D. (5) Prof. Ir. Iman Satyarno, M.E., Ph.D.

Kajian Perilaku Lentur Balok Finger Jointed Laminated Board (FJLB) Kayu Karet (Hevea Brasiliensis). [2022].
(1) M. AFIF SHULHAN (2) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (3) MARIS SETYO NUGROHO (4) SHERLY OCTAVIA

Increasing Inventory Rating Factor of Steel Truss Bridge Through Orthotropic Steel Deck Panel Application. [2022].
(1) ERIK WAHYU PRADANA (2) Dr.Ing. Ir. Andreas Triwiyono, IPU. (3) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (4) Saroj K. Sharma

European Yield Model Exponential Decay Constant Modification for Glulam after Fire Exposure. [2022].
(1) Mohd Nizam Shakimon (2) Rohana Hassan (3) Nor Jihan Abd Malek (4) Azman Zainal (5) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (6) Nor Hayati Abdul Hamid (7) Wei Chen Lum (8) Mohd Sapuan Salit

Nonlinear Finite Element Analysis of Flexural Laminated Veneer Lumber (LVL) Sengon Slender Beam. [2022].
(1) Dr. Eng. Mahmud Kori Effendi, S. T., M. T (2) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE.

TAHANAN LATERAL SAMBUNGAN GESER GANDA KAYU KARET FJLB – PELAT BESI DENGAN ALAT SAMBUNG BAUT. [2022].
(1) SHERLY OCTAVIA (2) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (3) URWATUL WUSQO

Comparing The Dynamic Properties of 1D, 2D, and 3D Models For Concrete Box-grider Bridge of 40-meter SPAN. [2022].
(1) WIRA SUCITRA IBRAHIM (2) Akhmad Aminullah, S.T., M.T., Ph.D. (3) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (4) Prof. Ir. Bambang Suhendro, M.Sc., Ph.D. (5) Prof. Dr. Ir. Bambang Supriyadi, CES., DEA., IPU.,ASEAN.Eng. (6) Renga Rao Krishnamoorthy

SHEAR AND BENDING PERFORMANCE OF HORIZONTAL LAMINATED BAMBOO LUMBER BONDED WITH UREA-FORMALDEHYDE AND PRESERVED WITH DELTAMETHRIN. [2022].
(1) TIRANA NOVITRI S (2) Dr. Ir. Inggar Septhia Irawati, S.T., M.T., IPM. (3) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE.

Finite Element Analysis of Bi-directional Shear Panel Damper with Square Hollow Section under Monotonic Loading. [2022].
(1) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (2) Angga Fajar Setiawan, S.T., M.Eng., Ph.D. (3) Prof. Ir. Iman Satyarno, M.E., Ph.D. (4) YUSUF HAROKI

Experimental Bond Behaviour of Glued-In Rod Connection for Mengkulang Glulam under Pull-Out Loading. [2022].
(1) Tengku Anita Raja Hussin (2) Rohana Hassan (3) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (4) Muhd Norhasri Muhd Sidek (5) Nor Hayati Abdul Hamid (6) Mohd Sapuan Salit

Structural Systems Comparison of Simply Supported PSC Box Girder Bridge Equipped with Elastomeric Rubber Bearing and Lead Rubber Bearing. [2022].
(1) ALVIN KURNIAWAN S (2) Dr.-Ing. Ir. Djoko Sulistyo (3) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (4) Angga Fajar Setiawan, S.T., M.Eng., Ph.D. (5) Prof. Ir. Iman Satyarno, M.E., Ph.D. (6) Sidiq Purnomo (7) Ignatius Harry

DESIGN PHASE OF A CYLINDRICAL LONG-SPAN COAL SHED WITH STEEL ARCH SPACE-TRUSS STRUCTURE. [2022].
(1) Angga Fajar Setiawan, S.T., M.Eng., Ph.D. (2) Akhmad Aminullah, S.T., M.T., Ph.D. (3) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (4) GHERRY NAUFALA K T (5) YULIAR AZMI ADHITAMA (6) MUHAMAD FAUZI DARMAWAN

Finite Element Analysis of Shear Panel Damper with Rectangular Cross-section under Monotonic Loading. [2022].
(1) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (2) Angga Fajar Setiawan, S.T., M.Eng., Ph.D. (3) Prof. Ir. Iman Satyarno, M.E., Ph.D. (4) YUSUF HAROKI

Evaluasi Perilaku Lentur Balok Tinggi LVL Sengon dengan Pengekang Lateral pada kedua Tumpuan. [2021].
(1) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (2) URWATUL WUSQO

Structural Performance of Prefabricated Timber-Concrete Composite Floor Constructed Using Open Web Truss Joist Made of LVL Paraserianthes Falctaria. [2021].
(1) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (2) URWATUL WUSQO (3) Angga Fajar Setiawan, S.T., M.Eng., Ph.D. (4) Prof. Ir. Bambang Suhendro, M.Sc., Ph.D. (5) Ir. Suprapto, Ph.D., IPM. (6) ACHMAD BASUKI (7) Adrian Leijten

Performance of a Cold Formed Steel Pedestrian Bridge under Static and Dynamic Loads. [2021].
(1) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (2) MARIA Y. M. MAKING (3) MUHAMMAD IKHSAN N A (4) Yohan Adiyuwano

Perilaku Rangkak Open Web Truss Joist (OWTJ) LVL Sengon. [2021].
(1) ACHMAD BASUKI (2) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (3) Prof. Ir. Bambang Suhendro, M.Sc., Ph.D. (4) Ir. Suprapto, Ph.D., IPM.

Outdoor Micro-Climate Analysis of Green Buildings on Environmental Affects Using PALM Software. [2021].
(1) GARUDEA MARTHA H (2) Ryo Moriwaki (3) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (4) Ir. Intan Supraba, S.T., M.Sc., Ph.D., IPM., ASEAN.Eng. (5) Ir. Sentagi Sesotya Utami, S.T., M.Sc., Ph.D. (6) Shahiron Shahidan

COMPRESSION AND TENSION CREEP BEHAVIOUR OF LVL SENGON (PARASERIANTHES FALCATARIA). [2021].
(1) ACHMAD BASUKI (2) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (3) Prof. Ir. Bambang Suhendro, M.Sc., Ph.D. (4) Ir. Suprapto, Ph.D., IPM.

CREEP SHEAR DEFORMATION OF GLUED-LAMINATED BAMBOO. [2021].
(1) NGUDIYONO (2) Prof. Ir. Bambang Suhendro, M.Sc., Ph.D. (3) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (4) Dr.Ing. Ir. Andreas Triwiyono, IPU.

Prediksi Nilai Kuat Lentur Kayu Tropis Berdasarkan Nilai Modulus Elastis (Prediction of Timber Bending Strength of Tropical Timbers Based on Its Modulus of Elasticity). [2020].
(1) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE.

Kuat Tarik dan Pola Kegagalan Kombinasi Sambungan Baut dan Sekrup pada Baja Canai Dingin. [2020].
(1) MUHAMMAD NUR IKHSAN (2) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (3) Dr.Ing. Ir. Andreas Triwiyono, IPU.

Pengaruh Jarak Sekrup terhadap Kapasitas dan Perilaku Penampang Tersusun Boks (Closed Section) Baja Canai Dingin. [2020].
(1) MARIA Y. M. MAKING (2) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (3) Prof. Dr. Ir. Bambang Supriyadi, CES., DEA., IPU.,ASEAN.Eng.

Design of an Acoustic-Based Nondestructive Test (NDT) Instrument to Predict the Modulus of Elasticity of Wood. [2020].
(1) Ir. Sentagi Sesotya Utami, S.T., M.Sc., Ph.D. (3) Balza Achmad, S.T., M.Sc.E. (4) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (6) Yakub Fahim Luckyarno, S.T., M.Eng.

KUAT TEKAN SANDWICH PANEL EXPANDED POLYSTYRENE PENAMBAHAN PLESTERAN DAN KAWAT LOKET. [2020].
(1) SUSTIKA PRATIWI (2) Ir. Ashar Saputra, S.T., M.T., Ph.D.,IPM.,ASEAN.Eng. (3) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE.

Kajian dan Evaluasi Struktur Slab Prestressed Precast Modular Concrete. [2020].
(1) I GUSTI LANANG BAGUS ERATODI, ST., MT. (2) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (3) Ay Lie Han (4) Dr.Ing. Ir. Andreas Triwiyono, IPU.

Experimental study of variation of models and layers in bamboo’s perpendicular connection to fiber with fiberreinforced polymer (FRP). [2019].
(1) Kuncoro, H. B.B. (2) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (3) Dr.Ing. Ir. Andreas Triwiyono, IPU. (4) Darwis, Z.

Pengaruh Bahan Pengawet Boraks dan Ekstrak Tembakau terhadap Perilaku Rekatan Bambu Laminasi Perekat Polymer Isocyanate. [2019].
(1) I WAYAN AVEND M S (2) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (3) Dr. Ir. Inggar Septhia Irawati, S.T., M.T., IPM.

Kuat Tekan Vertikal Dinding Panel Beton Expanded Polystyrene dengan Perkuatan Papan Kalsium Silikat dan Penyambung Geser Baut. [2019].
(1) Bella Lutfiani Al Zakina (2) Ir. Ashar Saputra, S.T., M.T., Ph.D.,IPM.,ASEAN.Eng. (3) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE.

ANALISIS PERKUATAN LENTUR BALOK KAYU SENGON DENGAN SISTEM KOMPOSIT BALOK SANDWICH (LAMINA DAN PLATE). [2019].
(1) TEGUH MULYO W (2) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (3) Ir. Suprapto, Ph.D., IPM.

PERENCANAAN JEMBATAN PEJALAN KAKI MENGGUNAKAN KAYU JATI HUTAN RAKYAT SEBAGAI MATERIAL KONSTRUKSI. [2019].
(1) MARIS SETYO NUGROHO (2) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (3) Prof. Dr. Ir. Bambang Supriyadi, CES., DEA., IPU.,ASEAN.Eng.

Two-dimensional finite element analysis of the flexural resistance of LVL Sengon non-prismatic beams. [2019].
(1) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (2) Dr. Ir. Inggar Septhia Irawati, S.T., M.T., IPM. (3) Shulhan, M. Afif

Study of Laminated Veneer Lumber (LVL) Sengon to Concrete Joint Using Two-Dimensional Numerical Simulation. [2019].
(1) URWATUL WUSQO (2) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (3) Dr. Ir. Inggar Septhia Irawati, S.T., M.T., IPM. (4) Angga Fajar Setiawan, S.T., M.Eng., Ph.D.

Analisa Kekuatan Tahanan Lateral Pada Sistem Komposit LVL Kayu Sengon dan Beton Pracetok. [2019].
(1) INTAN ARCHITA T (2) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (3) Ir. Suprapto, Ph.D., IPM.

The Effect of Rubber Pads on The Stress Distribution for Concrete Railway Sleepers. [2018].
(1) Renga Rao Krishnamoorthy (2) Zobaer Saleheen (3) Aruan Effendy (4) Anizahyati Alisibramulisi (5) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE.

Laminated Veneer Lumber (LVL) Sengon: An Innovative Sustainable Building Material in Indonesia. [2018].
(1) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (2) Shahiron Shahidan (3) ACHMAD BASUKI (4) Sharifah Salwa Mohd Zuki (5) Fadzli Mohamed Nazri

Pengaruh Variasi Penentuan Kerapatan Bambu Petung terhadap Nilai Modulus Elastisitas Dinamis. [2018].
(1) Nurjanah (2) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (3) Dr. Ir. Inggar Septhia Irawati, S.T., M.T., IPM.

Collapse Simulation of Ammu Hawu Traditional Timber House in Nusa Tenggara Timur, Indonesia. [2018].
(1) Cindy Novaria Nada Karina (2) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (3) Prof. Ir. Bambang Suhendro, M.Sc., Ph.D. (4) Pang - jo Chun

The Performance of Cold-formed Steel Long-span Roof Structure Combined with Laminated Timber: Cold-formed Steel–Laminated Timber Composite. [2018].
(1) Dr. Ir. Inggar Septhia Irawati, S.T., M.T., IPM. (2) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (3) NICHOLAS PADUA S

Bolt Spacing and End Distance of Bolted Connection of Laminated Veneer Lumber (LVL) Sengon. [2017].
(1) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (2) DANI NUGROHO SAPUTRO

STUDY ON APPLICATION OF POST-TENSIONED CROSS-LAMINATED TIMBER WALLS IN INDONESIA. [2016].
(1) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE.

Bending capacity of non-prismatic LVL beams paraserianthes falcataria. [2016].
(1) I GUSTI LANANG BAGUS ERATODI, ST., MT. (2) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE.

Evaluasi Kuat Tumpu Alat Sambung Baut pada Papan WPC dari Limbah Sengon dan Plastik HDPE. [2016].
(1) YUDHI ARNANDHA (2) Prof. Ir. Iman Satyarno, M.E., Ph.D. (3) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (4) ARFIATI FARDHANI

Effects of Bolt Distance on Flexural Behavior of Bolt-Laminated Bamboo Beam. [2016].
(1) GUSTI MADE OKA (2) Dr.Ing. Ir. Andreas Triwiyono, IPU. (3) Ir. Suprapto, Ph.D., IPM. (4) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE.

Effects of Bolt Distance on Flexural Behavior of Bolt-Laminated Bamboo Beam (Penulis 1: Gusti Made Oka). [2016].
(1) Dr.Ing. Ir. Andreas Triwiyono, IPU. (2) Ir. Suprapto, Ph.D., IPM. (3) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE.

Repair of timber beams using CFRP sheets and punched metal plates. [2016].
(1) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (2) AFRIZA MARIANTI.S

Development of cold formed steel-timber composites for roof structures: Connection systems. [2016].
(1) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (2) ANINDHA DYAH DANASTRI (3) Prof. Dr. Ir. Bambang Supriyadi, CES., DEA., IPU.,ASEAN.Eng.

Structural Condition Assesment of Steel-Framed Maintenance Plant in Muara Badak, Balikpapan, East Kalimantan ( 1: Adinda Chaerany). [2016].
(1) ADINDA CHAERANY (2) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (3) Prof. Ir. Henricus Priyosulistyo, M.Sc., Ph.D. (4) Dr.Ing. Ir. Andreas Triwiyono, IPU.

Creep Properties of Walikukun (Schouthenia ovata) Timber Beams. [2016].
(1) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (2) NGUDIYONO (3) ACHMAD BASUKI

Study of utilization of LVL sengon (Paraserianthes falcataria) for Three-Ginged Gable Frame Structures. [2016].
(1) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (2) PINTA ASTUTI

Manufacture and properties of citric acid-bonded particleboard made from bamboo materials. [2016].
(1) Prof. Dr.Agr.Sc. Ir. Ragil Widyorini, S.T., M.T., IPU. (2) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (3) Prof. Ir. Tibertius Agus Prayitno, M.For. PhD

Tahanan Lateral Bambu Laminasi dengan Konektor Pelat Disisipkan Menggunakan Sambungan Baut. [2014].
(1) I GUSTI LANANG BAGUS ERATODI, ST., MT. (2) Dr.Ing. Ir. Andreas Triwiyono, IPU. (3) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE.

THE EFFECT OF SPECIFIC GRAVITY ON EMBEDDING STRENGTH OF GLUEDLAMINATED( GLULAM) BAMBOO: NUMERICAL ANALYSIS AND EXPERIMENT. [2014].
(1) I GUSTI LANANG BAGUS ERATODI, ST., MT. (2) Dr.Ing. Ir. Andreas Triwiyono, IPU. (3) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (4) Prof. Ir. Tibertius Agus Prayitno, M.For. PhD

Lateral Load Resistance of Laminated Veneer Lumber Sengonwooden Joints with Wooden Dowels. [2014].
(1) NIKEN PALAEOWATI (2) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (3) Ir. Suprapto, Ph.D., IPM.

A Finite Element Analysis of Bearing Resistance of Timber Loaded through a Steel Plate. [2012].
(1) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (2) Hirai, T. (3) Hayashikawa, T (4) Leijten, A.J.M.

Beam to column timber joints with pretensioned bolts. [2011].
(1) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (2) Hirai, T. (3) Hayashikawa, T

Seismic Properties of Moment-resisting Timber Joints with a Combination of Bolts and Nails. [2011].
(1) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (2) Hayashikawa, T (3) Hirai, T. (4) Leijten, A.J.M.

Shaking table test of moment-resisting timber joints with pre-tensioned bolts. [2008].
(1) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE.

Effect of pretension in bolts on hysteretic responses of moment carrying timber joints. [2008].
(1) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (2) Hirai, T. (3) Hayashikawa, T

Load-carrying capacity of steel-to-timber joints with a pre-tensioned bolt. [2008].
(1) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (2) Hirai, T. (3) Hayashikawa, T

One-year stress relaxation of timber joints assembled with pretensioned bolts. [2008].
(1) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (2) Hirai, T. (3) Hayashikawa, T

M-Theta curve of timber connection with various bolt arrangements under monotonic loading. [2007].
(1) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE.

Bearing properties of Shorea obtusa beneath a laterally loaded bolt. [2007].
(1) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (2) Hirai, T. (3) Hayashikawa, T

Safety factor of timber bolted-connection designed with SNI-5 (2002). [2005].
(1) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE.

Split ting connection of Coconut and Bangkirai lumber. [2003].
(1) Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE.