| Penulis/Author |
ACHMAD BASUKI (1); Ir. Ali Awaludin, S.T., M.Eng., Ph.D., IPU., ACPE. (2) ; Prof. Ir. Bambang Suhendro, M.Sc., Ph.D. (3); Ir. Suprapto, Ph.D., IPM. (4) |
| Abstrak/Abstract |
This study was aimed to investigate the creep behavior of laminated veneer lumber (LVL) Sengon,
especially under the application of compression and tension stress parallel-to-the-grain. In Indonesia
LVL made from the fast-growing Sengon (Paraserianthes falcataria) species is designed to be used
as a substitution for solid wood in building construction. Creep test was conducted on the specimens
with reference to the ASTM D143?09 standard test methods for small clear specimens of timber.
Moreover, the constant loads were made equal to about 20%, 30%, and 40% of the 60% ultimate
load derived from the static test and the creep test was conducted in a chamber having an average
temperature of 25oC and minimum relative humidity of 65%. The results of creep test for a period of
90 days showed that the creep factors were 0.51, 0.52, and 0.41, respectively for the specimens under
tension stress level of 20%, 30%, and 40%, respectively. In the case of specimen under compression
stress parallel-to-the-grain, the creep factors were 0.42, 0.41, and 0.31, respectively, for stress level
equals to 20%, 30%, and 40%. It can be concluded that the creep factor under tension stress is slightly
higher than that of specimens under compression stress, and these obtained creep factors are much
lesser than the values provided in the code.
Keywords: Compression creep, Creep factors, LVL Sengon, Tension creep |
