Karya
Judul/Title Embedded System of Battery Charging with Constant Current System using Microcontroller and IC LM338
Penulis/Author Dr. Fitri Puspasari, S.Si., M.Sc. (1) ; Prof. Dr. Sismanto, M.Si. (2)
Tanggal/Date 30 2024
Kata Kunci/Keyword
Abstrak/Abstract The battery has the function of an electrical energy storage system. However, charging the battery is prone to damage. Damage to the battery is often caused by overcharging. The time used during the battery charging process is an important factor that must be considered when charging. thus, efficient battery charging is important and very necessary to avoid damage. An another important aspect of a battery charging method is the current and voltage values supplied during its charging process. The presence of inappropriate values damages and reduce battery life, while the maintenance of a constant current is an important charging process step that extends service life. This research is expected to create a safe and optimal battery charging system with a simple low-cost circuit based on constant current by utilizing the LM388 Integrated Circuit (IC) regulator. This study discusses a 12 V battery charging system with monitored and controlled constant current using an R-Shunt sensor. Voltage monitoring while charging was carried out with voltage sensors using a constant current of 0.1 to 1.3 Ampere. Furthermore, voltages and currents were displayed through a Liquid Crystal Display (LCD) screen controlled with Arduino Uno during battery charging. The measurement results showed that the circuit reached voltages and currents of 14.07 V and 0.19 A respectively for a charge duration of 8 hours.
Rumpun Ilmu Teknik Elektro
Bahasa Asli/Original Language English
Level Nasional
Status
Dokumen Karya
No Judul Tipe Dokumen Aksi
1244-Article Text-1078-1-10-20241115.pdf[PAK] Full Dokumen
2AKREDITASI JURNAL FIDELITY.pdfDokumen Pendukung Karya Ilmiah (Hibah, Publikasi, Penelitian, Pengabdian)